Scheibe-Loravia Topaze

Home » Shop » Chris Williams Short Kits » Scheibe-Loravia Topaze

Scheibe-Loravia Topaze


In stock

Scheibe-Loravia Topaze short kit from the Chris Williams plan

Designed by top scale glider enthusiast Chris Williams, this model is available in 1/3 and 1:3.5 scale sailplane, it uses half round ramin hardwood mouldings to replicate the tubular metal fuselage of the original glider. Construction is aided by the use of building jigs.

View a Watch a video of the Topaz glider

Scale 1/3 Radio Functions: 5 (elevator, ailerons, rudder, airbrakes, tow release)

Wingspan: 197″ / 5000 mm

Scale: 1:3.5
Radio Functions: 5 (elevator, ailerons, rudder, airbrakes, tow release)
Wingspan: 169″ / 4400 mm


Plan and canopy available from Sarik Hobbies

John Roper’s superb topaz built from this kit.
lcs chris williams topaz john roper build 1lcs chris williams topaz john roper build 2lcs chris williams topaz john roper build 3

SKU: LCS-CW-Scheibe-Loravia Topaze-short-kit Category:


The Scheibe SF-27 Topaz

is a single seat Standard Class sailplane, designed and built in Germany in the 1960s. A motorised version was also produced. Significant numbers remain active.

Design and development

The SF-27 is a shoulder-wing, single seat Standard Class sailplane, succeeding the Scheibe Zugvogel IIIB in production. It was designed to 1960s Standard Class competition rules requiring a span of no more than 15 m and a fixed undercarriage. Built of wood and steel, its structure was conservative; at a time when many manufacturers were using glassfibre structurally in wings and fuselages, the SF-27 only used it to cover the forward fuselage.

The wing of the SF-27 is built around a single beechwood boxspar, with plywood ribs and a leading edge torsion box. The wing covering is largely ply, entirely so over the outer section. The inner section is covered with ply from the leading edge to behind the spar, the rest with a mixture of ply and fabric. Ailerons and Schempp-Hirth airbrakes are likewise ply covered. The cantilever horizontal tail is an all-moving ply and fabric covered surface, set at the top of the fuselage; the fin is covered with ply and the rudder with fabric.

The fuselage is a welded steel structure covered, from nose to wing trailing edge, with a glassfibre shell. The wing root fairing is also glassfibre. Further aft the fuselage is fabric covered over wooden stringers. The cockpit, within the glassfibre shell, has a single piece Plexiglas canopy, the pilot sitting in a semi-reclined position. The SF-27 has a fixed monowheel undercarriage, fitted with brakes, plus a small tailwheel.

The SF-27 first flew on 12 May 1964. 30 had been built by February 1966, the final total being about 120. Scheibe also produced a motorised version, the SF-27M, with a 26 hp (19 kW) 4-cylinder Hirth F-102 A2 two stroke engine on a retractable mast above the wing behind the cockpit. Its gross weight is increased to 386 kg (850 lb) and it is 115 mm (4.5 in) longer, with a best glide ratio 32:1.


Standard class sailplane.
One-off 17 m span version.
Motorised version.
SLCA-10 Topaze
Licence built variant built in France by Société Lorraine de Constructions Aéronautiques (SLCA)

Specifications (SF-27A)

General characteristics
Crew: 1
Length: 7.05 m (23 ft 2 in)
Wingspan: 15.0 m (49 ft 3 in)
Wing area: 12.99 m2 (139.8 sq ft)
Aspect ratio: 18.6
Airfoil: Wortmann FX 61-184 at root, FX 60-126 at tip
Empty weight: 210 kg (463 lb) equipped
Gross weight: 320 kg (705 lb) normal take-off
Max takeoff weight: 370 kg (816 lb)

Stall speed: 55 km/h (34 mph; 30 kn)
Maximum glide ratio: 34:1 at 88 km/h (55 mph)
Rate of sink: 0.64 m/s (126 ft/min) best, at 74 km/h (46 mph)


Go to Top